Why KSU-10 Meets the Needs of Farms with 300–400 Dairy Cows

The KSU-10 feeder is an implement solution for metered dispensing of mixed feed; see more details at https://kaskadx.com/en/feed-dispenser-ksu-10 — and in real-life operation, it meets the daily needs of a herd of 300–400 animals due to its high performance, ease of use, and reliable operation in typical cow barn conditions.

Key Parameters Affecting Distribution Power

Body capacity: 10 m³; lifting capacity: up to 4 tonnes

Dispensing rate range: ≈70–480 m³/h (adjusted by tractor speed and longitudinal conveyors)

Configuration: 2 drum beaters + longitudinal and transverse conveyors; discharge to one or both sides

Chassis: wheel carriage on pneumatics, hydraulic brakes

Dimensions: 2.3×6.67×2.5 m; weight: ≈2.7 tonnes; turning radius: ≈6.5 m

Drive and control: all operations are controlled by the tractor driver

Feedstock nomenclature: silage, haylage, chopped root crops, leafy-stem mass, mixed feeds

Why it Meets the Needs of a Farm with 300–400 Animals

In this herd size, the main task is to distribute feed quickly and evenly along two longitudinal feeding lines. The KSU-10 solves it by combining a 10-cubic meter body and adjustable performance: one pass along the row with simultaneous left/right distribution covers sections without overloading or downtime. Two beaters stabilize the flow of mass, while the transverse conveyor evenly discharges the mixture into troughs, reducing overeating and waste. In fact, this gives a high cycle time "loading — dispensing — next group" without the need for additional equipment.

Compatibility with Cow Barn Infrastructure

The KSU-10 is designed to fit standard barn dimensions: recommended gate height from 2.6 m, distance between rows ≈2.3 m, trough height up to 75 cm. Discharge to one or both sides allows for adaptation to the layout, and hydraulic brakes and a small turning radius simplify maneuvering in tight aisles.

Economics and Cost

The model creates savings in labor costs due to mechanization of feed distribution and reduction in time per cycle. The price is indicated as 360,000 UAH (pre-order) in the product card, and 222,000 UAH in the description; please check the current cost with a manager. In any case, payback is achieved through reduced labor costs and even feeding, which supports milk yield or weight gain.

Maintenance and Available Parts

Daily inspection involves checking conveyor chains, beaters, and bearings; routine work is performed using standard tools. Consumables and units are available from the supplier:

Anchor conveyor sprockets (various modules), conveyor plank, beater support assembly, bearings

Consultations on selection, warranty and post-warranty service, prompt delivery throughout Ukraine

What this Means for the Farm

Speed and Rhythm: one tractor with KSU-10 provides daily dispensing for 300–400 animals without "bottlenecks"

Flexibility: works with a wide range of feeds, distribution to one/two sides, speed adjustment

Reliability: simple mechanics, proven design, available parts

Safety and Control: hydraulic brakes, pneumatic wheels, control from the tractor cab

Performance in Numbers for Feeding Planning

A practical scheme for a herd of 300–400 animals is based on an adjustable dispensing rate (≈70–480 m³/h) and the ability to discharge feed to one or two sides. On wide aisles, it is advisable to use two-way distribution: fewer maneuvers, higher pace. In narrow corridors — one way, in order to maintain dosing accuracy. With a full body load (10 m³), the operator sets up the "loading — dispensing — return" cycle based on the specific density of the mixture and length of the feed tables; the key advantage of the KSU-10 is that one tractor with a trailer can consistently keep pace without involving additional equipment.

Different Types of Feed Without Overloading Mechanisms

Two drum beaters stabilize the flow of mass regardless of whether you are working with silage, haylage, chopped root crops or mixed feeds. The longitudinal conveyors feed the material to the transverse one, which carefully discharges the feed into troughs. This reduces peaks in dispensing and helps avoid "hills" and voids on the table, especially noticeable on long lines when distributing two-way.

Maneuverability and Compliance with Infrastructure

Dimensions of 2.3×6.67×2.5 m and a turning radius of about 6.5 m simplify movement in built-up cow barns. With the recommended gate height from 2.6 m and row spacing ≈2.3 m, the KSU-10 easily enters sections, while hydraulic brakes add safety when loading on inclined ramps. The ability to discharge feed left/right allows you to serve two rows of tables with one pass if the layout permits.

Setting the Tempo: Role of the Tractor and Operator

The dispensing rate is determined by the tractor speed and adjustment of the longitudinal conveyors. The operator selects a mode from the cab: for loose mixtures, increases dispensing; for moist haylage — reduces it in order to maintain uniformity and not "overwhelm" the conveyor. This flexibility creates a predictable window for morning and evening feeding even with inconsistent diet density.

Economics of the "Loading - Dispensing" Cycle

Thanks to the 10-cubic meter body and stable mechanics, the number of trips and idle movements is reduced. This directly reduces labor costs and time, while even dispensing maintains feed consumption at a level necessary for milk yield or weight gain. If you need to clarify the cost and configuration based on your diet and logistics, current contacts and prices are available on the product page; the card indicates options such as "pre-order" and an approximate price; accurate figures are confirmed by a manager.

Operation and Maintenance without Downtime

Daily routine involves visually inspecting conveyor chains, condition of beaters and bearings, checking tension and brake hydraulics. Design simplicity makes preventive maintenance easier for in-house mechanics, while the availability of standard units (sprockets, planks, beater supports, bearings) from the supplier reduces downtime during peak seasonal load.